Wednesday, October 10, 2018

The Starship Geomorphs book is finally complete!


The Starship Geomorphs book is finally complete and ready for download. I can safely say after three years of putting this project together the itch has been thoroughly scratched. If you have any constructive criticisms please comment below. I'm not opposed to revisiting this sometime in the future if the situation warrants it. In the meantime I'm going to take a short break and get back to some smaller, less intense projects. Thanks for your patience, I hope you find it worth the wait.


Click here to download the expanded PDF: Starship Geomorphs v2.0.pdf (released 07-26-2020)
Click here to download the updated PDF: Starship Geomorphs v1.1.pdf  (released 11-11-2018)
Click here to download the original PDF: Starship Geomorphs v1.0.pdf  (released 10-10-2018)
-----------------------------------------------------------------------
Edit:
The question has come up regarding printing these for miniature use. A couple things to consider first:
The scale provided in the PDF is 1/4"=5'-0" or one square grid. This is simple enough to scale up for 15mm (1/2"=1'-0") figure use. If you are using a standard letter size (8.5"x11") printer you will be limited to Edge and Corner Geomorphs which will print out at 10"x5" and 5"x5" respectfully. A Standard Geomorph will print at 10"x10" so will not fit on letter size paper, but if your printer supports 11x17 that would work.

To print an Edge or Corner Geomorph to 8.5" x 11" paper for 15mm figures:
Routine, Admin, INT    5 min, Safe  (That's a MegaTraveller joke)

Kidding aside, here's how I did it using Adobe Acrobat Pro. Your software may vary.
Open the PDF to the page you wish to print
Edit > Take a Snapshot > draw boundary around desired geomorph > Print (open print dialogue box) > set Custom Scale to 200% > set orientation to Landscape mode for Edge Geomorph > Print

For Standard Geomorphs at 15mm or any geomorphs at 25mm scale (1"=5'-0") I would use the same process as above, but change the paper size to something like 11x17 or 18x24, depending on what you are printing, set the Custom Scale to 400% (for 25mm) and instead of printing to your printer, I'd print to PDF, and then send that PDF to a print shop for printing if you can't print the larger paper size. You may be able to set it up such that you print a larger drawing on a series of 8.5x11 sheets and tape them together, but personally I would not go that route. Good luck!

An example of an Edge Geomorph printed on 8.5x11 at 200% for 15mm figures:

 -----------------------------------------------------------------------

A few quick notes:
This PDF version is mainly intended for viewing on a computer or other device. While in my experience the individual geomorph pages look fine when printed, the illustrations come out very dark. It is doubtful that I will be creating a print version.
Regarding navigating through the document: I spent a good amount of time creating hyperlinks all through the document, so it should be very easy to find what you are looking for. I find jumping to the Indexes at the back of the book, clicking on what I am looking for, and making copious use of the Alt-Left Arrow to go back to the previous page to be very helpful. The book is also fully bookmarked.

90 comments:

  1. Whoa.... Fantastic Effort. An awesome tool for an Referee. Thank you for creating this.

    ReplyDelete
  2. What a fantastic and flexible resource for the busy Referee! This will come in very handy, thank you.

    ReplyDelete
  3. Bravo! Thanks for making this available to the community!

    ReplyDelete
  4. Thank you for making this freely available. I know I'll use it, maybe even this weekend!

    ReplyDelete
  5. Sheer beauty. Thanx!
    What amazing effort.

    ReplyDelete
  6. it looks awesome, going to pass this link along to some Starfinder folks who are talking about not having deckplans

    ReplyDelete
  7. Dude, you should consider a Patreon account or at least a tip jar.

    ReplyDelete
  8. Outstanding! Thank you so much. Seconding the idea of a tip jar or something.

    One erratum to point out -- 169 and 409 should refer to *martial arts.

    ReplyDelete
    Replies
    1. Thanks for the catch. I've probably reviewed this thing a dozen times of the last couple years and literally within five minutes of posting it online this morning found four errors. Reminds me of the time I was working on some architectural drawings and called out for "duckwork". I've marked it on my to do list for the next release.

      Delete
    2. It's always something! Happens to me all the time.

      Delete
    3. Thank you, I love it!

      Typo: Page 184 "Workpods" "short sleeve" or "shirt sleeve"?

      Delete
    4. Argh! Didn't mean to post that here, sorry.

      Delete
  9. Looks great! Has anyone thought of making an art pack for any of the computer mapping tools?

    ReplyDelete
    Replies
    1. there is a half-hearted attempt on Cartograpy Assets for Dungeondraft software. It's not worth downloading. It's lacking all but the basic walls, doors, windows and a handful of furniture and machineries. Couldn't even tackle the first geomorph with it, other than sketching in bulkhead walls.

      Delete
  10. You should consider selling this on drivethru or rpgnow

    ReplyDelete
  11. Nice work! Maybe one more page of tram geomorphs to allow for routing & tunnels (such as going between one and two lane areas, and tunnels for the 3-square-wide trams as well as the 2-square-wide ones)? Though that's a very minor thing.

    ReplyDelete
  12. As others have said, fantastic work! You should charge for it or at least allow us voluntarily pay something. What tool(s) did you use to create this?

    ReplyDelete
  13. Absolutely amazing. I'm enjoying just looking over the maps.

    I don't suppose there's a chance of getting the raw image files, and/or a version without squares and/or with 3' hexes (for GURPS)?

    ReplyDelete
    Replies
    1. While it would be easy enough for me to print these without the grid, it takes about 12 hours to print the whole set plus another 10-12 to add the hyperlinks. I experimented with this a bit and when I do the next major reprint I could export the files with layers on, so it would be easy for users to turn off the grid. That would have the added benefit of users being able to turn off room names for blank maps and turning off shading to save on ink. I just experimented with a version with both a standard and hex grid, but then the user would have to go through each sheet and turn off the grid they don't want. I'll keep thinking about this, but I'm afraid in the short term I can't help.

      Delete
  14. Fantastic book. Thank you so much. Will make demoing Traveller at cons much easier to plan. Like others I would suggest a Donate button or some other format to allow us to buy you a beer / coffee /1oot Scout.

    ReplyDelete
  15. Astonishing. Thanks very much for your generosity.

    ReplyDelete
  16. I would gladly donate if I could.

    Can anyone recommend software to cut these geomorphs and paste them together electronically? My graphics skills are woefully out of date.

    ReplyDelete
    Replies
    1. No need to donate, thanks.
      Just in case you are not Old School from CotI, here's the answer I posted there:
      It really depends on the tools at hand. Assuming you are using a PC, you can use the Windows snipping tool to clip out the geomorphs you want. Try to clip them right down the middle of the wall for cleaner connections when assembling. In most word processing documents you can add images, rotate, and scale them. In Microsoft Word you need to go Insert > Picture for each image. Then right click on each image and set Wrap Text to something like Through, Behind Text, or In Front of Text so they can be moved freely.

      Delete
    2. Hi Robert. I'm the developer of MapForge (battlemap creation software for Windows and Mac). My software allows users to easily assemble geomorphic tiles like yours into a layout of their choice by stamping down tiles or other assets that they can easily rotate, flip, duplicate, randomize, etc.

      Would you be willing to give me permission to put your geomorphic tiles into a free content Add-On for my software? I'm thinking that folks could either use the resulting layout "as is", or use it as a blueprint/guide to lay down textures and mapping assets over, to essentially recreate each tile in full color and in high-res. My software is free to use for those who only need low resolution output (e.g. for use in a virtual tabletop app like Roll20 or Fantasy Grounds). In short, I think Travis and others could benefit by having a ready-made app to assemble your content in.

      Delete
    3. Heruca - Overall I am open to doing this. Please send me an email at pearcedesignstudio@gmail.com so we can discuss specifics.

      Delete
    4. Does this led to anything? That feature would be awesome!

      Delete
    5. No one ever followed up with me on anything for MapForge, but some other blog readers converted the Geomorph books into image files suitable to work with most virtual table top systems. Image files can be found on the blog.

      Delete
  17. Amazing. And generous. You sir are a credit to the hobby!

    ReplyDelete
  18. This is truly amazing. Is there any way to export the images as svg or some other portable vector format so that they can be easily printed/scaled/pasted?
    pdfimage can't extract the artwork due to the way it was generated while gimp/screencaptures loose resolution due to raster vs vector manipulation.
    Also, a reference tagline as in "Artwork created by ....." with the information you want us to include so that you get proper credit in anything that uses your material would be really appreciated.

    ReplyDelete
    Replies
    1. Dalton Calford (for some reason it did not post my name)

      Delete
    2. Since AutoCAD drawings are a vector format, I understand this is technically possible, but requires Adobe Illustrator and SVG converters I don't have and would probably triple the production time. In a better universe I have mad Illustrator skills and this wouldn't be difficult.

      I'm not too concerned with use of taglines for the artwork. So long as people aren't cropping off my initials or taking claim or charging for the work I'm pretty much happy just to know that people are getting some use out of it. Links back to my blog are always appreciated, but not necessary. This is a relatively small community and word of mouth seems to be doing pretty well.

      Delete
    3. I have programs that convert between varios formats. If you have a sample of your work I am willing to try the conversions for you.

      Delete
    4. I have been able to extract all the graphics, as vector graphics/svg graphics.
      Currently each page is a single SVG file. From there, in a svg editor, you ungroup the page elements, select the graphics you want, copy/paste onto a new svg document and edit as needed.
      For example, I have removed all the grid lines from the modular cutter page to replace with hexes.
      So, if Rob is ok with this, I will post the svg files onto a repository so everyone has access and can modify as they desire.
      I also have the software to convert the svg to dxf for import into cad or profantasy style programs.
      I am willing to post this up as long as everyone is ok with this.

      Delete
  19. Absolutely terrific work - can't wait to use 'em!

    ReplyDelete
  20. Got the link from /r/traveller. Thank you very much.

    ReplyDelete
  21. Absolutely amazing set of deckplans. And the "colour" illustrations scattered throughout the product may even be worth more than the plans themselves for giving players an immersion into the gaming world.

    Absolutely fantastic work!

    ReplyDelete
  22. I have boosted the signal on this to Starfinder and Hero System/Champions FB groups and forums, linking back to this blog

    ReplyDelete
    Replies
    1. I saw that on the Hero Games forum. Thanks!

      Delete
    2. cool... I should pay more attention to the forums there, I was part of the team that created Traveller Hero

      Delete
  23. Superb work here. Many thanks for this.

    ReplyDelete
  24. I also passed on this link to Marc Miller, havent heard back beyond that he read the message on facebook

    ReplyDelete
  25. A huge amount of work, thank you very much!

    ReplyDelete
  26. Sir, you have just been awarded the Starburst for Extreme Heroism!

    ReplyDelete
  27. I talked to Marc Miller tonight at Walmart, he really likes this, and wasnt at all concerned about it

    ReplyDelete
  28. Thank you providing the geomorphs free

    ReplyDelete
  29. This is the most amazing and useful thing ever for Traveler or Sci-fi GMs out there. A big thank you. Great job. It is fantastic.

    ReplyDelete
  30. Thank You for the level of effort put into this. Great work!

    ReplyDelete
  31. Beautiful work Robert! Thank you!

    ReplyDelete
  32. Amazing! Please, please, please LULU this!

    ReplyDelete
  33. Many thanks! This is an incredible resource and a real joy to read. I especially like all of the suggestions for using the geomorphs.

    ReplyDelete
  34. As so many before have said - you sir are a saint, nay a knight, or perhaps a master. Thank you, thank you, thank you.

    ReplyDelete
  35. damm, this is impressive work. congratulations.

    ReplyDelete
  36. Unbelievable. You have provided a top-quality resource to the Traveller community, free of charge. I commend your creativity and effort, and also your amazing generosity - thank you!

    ReplyDelete
  37. I have to say, this is easily one of the better Trav products that I've seen in years. Well done.

    ReplyDelete
  38. I wanted to say thank you again for this! I ran yesterday and the Baron pitched her plan to the PCs in the Arboretum Edge so she could gesticulate out the window wall at her cavern city.

    Trying to work out how to use the Dojo.

    Nitpicking questions: How different is 1.1 from 1.0? And why is the text not searchable in 1.1? Is it just me?

    ReplyDelete
    Replies
    1. You are certainly welcome. Glad to hear someone is getting use out of the arboreta. I wasn't sure if people would think that was an unnecessary luxury. Release 1.1 fixes a few spelling and grammatical errors, corrects some line weight issues, and makes some minor design tweaks to many of the geomorphs - fewer group freshers - that sort of thing.

      With 1.1 I was looking at print version opportunities and was having difficulty getting the PDF in a format that was printer friendly AND would recognize my fonts. In the end I had to convert the text to graphics, which is why it is not searchable. I spent a lot of time creating hyperlinks throughout the document, so things should be easy to find if you use them with the index, but I can see how searchable text might still be beneficial. I'll try again with the next version if it ever happens.

      Delete
  39. OK, thanks. I've seen annoying technical issues like that elsewhere, with no easy solution.

    ReplyDelete
  40. Thank you Robert for this. This is awesome.

    I was a Traveller player 35 years ago, and you gave me something I did not feel for a very long time. Maybe I will try and play again with my sons, thanks to you.

    Kudos to your mapping skills.

    ReplyDelete
  41. I've just downloaded and had a quick perusal of this and it's terrific stuff. Well done and thank you

    ReplyDelete
  42. This is a most impressive work! I have been thinking about my lost Traveller resources lately. While collecting some other stuff online, I ran across this. I am completely blown away. Can't wait to see what else you release!

    ReplyDelete
  43. I’m late to the party here, but way cool!

    ReplyDelete
  44. I used a few of these tiles last night to add colour to a last-minute adventure I prepared during the day. My players loved them! We normally use 25mm and although this time I was only able to print out smaller scale A4 size prints, I'll be slicing and dicing these tiles up to 400% scale and printing my usual A1/A0 print shop for future adventures. Thank you!

    ReplyDelete
  45. Many thanks. This was very much what I needed

    ReplyDelete
  46. This comment has been removed by the author.

    ReplyDelete
  47. Im a huge fan. I just found you today, but your work is awesome. I wish I was able to play at my house, but this stupid pandemic has really put a damper on that... as I am sure we are all aware of. I started playing digitally but man trying to find assets are not super easy online. Anyway, keep up the great work!!

    ReplyDelete
  48. Just pointed out to this site. What an awesome resource. Thank you for all the effort and work involved.

    ReplyDelete
  49. Accidentally blundered into this as a result of seeing your dropship deck plan on Pinterest. Glad I followed up!
    And really like the additional art, too.
    Now to work out how to extract the symbol set to use in my own non-geomorphed maps ... :-)
    Thanks again! (I'd have paid for this on DTRPG, if it was on there.)

    ReplyDelete
    Replies
    1. Symbols are already available. Check out the Starship Symbols book and associated CAD files here: http://travellerrpgblog.blogspot.com/2020/08/starship-symbols-book.html

      as well as JPG images created by others here:
      http://travellerrpgblog.blogspot.com/2020/06/starship-geomorph-images-and-virtual.html

      and here:
      http://travellerrpgblog.blogspot.com/2020/08/more-images.html

      and here:
      http://travellerrpgblog.blogspot.com/2020/08/even-more-images.html

      Delete
  50. Wish I had this back in the 1980s. What a great tool.

    ReplyDelete
  51. Any plans on a print ready D&D scale (1inch = 5 feet) version?
    Or a buy a table top ready version?
    I would like a hard copy for table top play.

    ReplyDelete
    Replies
    1. Due to the size required and quantity of geomorphs in the book I don't have any plans to create hardcopies of that scale. I'd recommend taking the PDF to a reprographics company and have them print the pages you want scaled up 400%. At 1" = 5', a standard geomorph would be 20"x20". Hope this helps.

      Delete
  52. These are great! Thank you so much for making them available.

    ReplyDelete